Laying tiles in the bathroom: a step-by-step process of work + selection of design solutions
Repair work, during which tiles are laid in the bathroom, are considered the most difficult. That is why many owners prefer to find a professional tiler who knows all the secrets of the competent handling of this fragile, but very beautiful and practical, finishing material. A varied offer of tile manufacturers can amaze anyone, even a very sophisticated buyer, so everyone is faced with the problem of choosing a tile. Designers who can prepare several interior design projects can help determine the world of tiles. You can try and independently prepare a plan, in accordance with which the tile will be laid. This is easy to do if you purchase wall and floor tiles, as well as a frieze and decor from the same collection, skillfully selected by the manufacturer in color and style.
Content
What will be needed to complete the work?
For the acquisition of a sufficient amount of ceramic tiles, the bathroom is measured and a plan is drawn up on which the length, width, and height of the room are noted. If you doubt the correctness of the calculations, then capture the source data in the store. Consultants will recount, adding to the required number of tiles the minimum margin of 5% of the total volume of finishing material. "Extra" tiles can come in handy both during facing works and during further operation for repair.
In addition to tiles, other additional materials will be required, as well as a minimum set of tools:
- level, ruler, tape measure;
- electric drill with nozzles;
- grinder or device for cutting tiles;
- roller, foam sponge, rags;
- brushes and spatulas;
- wooden or metal slats;
- cross stitches;
- glue, putty and primer;
- grouting and flashing;
- antiseptics;
- special waterproofing.
You can find out how to choose a toilet tile for a toilet from a special article on our website:https://floor.expertexpro.com/en/dizain/plitka-dlya-tualeta-foto.html.
Surface preparation
The walls and floor are free from the elements of the old decoration. If the walls were painted, then the paint layer is removed. Otherwise, the tile may come off and fall off. After cleaning and garbage collection, they begin to level the surfaces. Using the level, the presence of differences is checked, the height of which exceeds 5 mm for each meter of the wall. The discovered irregularities are plastered, while the laying of tiles is delayed for two weeks. After all, the plaster layer must be allowed to dry. After that, two layers of primer are applied to the leveled surface of the walls.
Important! The entire course of further facing works depends on the quality of the preparatory phase. Glueing and laying tiles on perfectly even walls is easy and simple.
Technology of work
So, we carry out the work in the following order:
- At a level horizontally to the wall, attach a metal or wooden lath, under which the first row of tiles will be located, which are laid after the end of the floor lining.
- The preparation of the adhesive solution begins immediately before the start of the masonry. The finished dry polymer-cement mixture is poured into water previously poured into a container in accordance with the instructions.To obtain a homogeneous cream-like mixture, an electric drill is used, to which a special mixer nozzle is attached.
- Using a notched trowel, apply glue to the wall surface with a thin layer. Sometimes the adhesive mixture is spread directly with the trowel using a spatula.
Tiles in the bathroom can be combined to produce a variety of effects and unique designs. You can familiarize yourself with the design ideas in the material:https://floor.expertexpro.com/en/dizain/foto-oformleniya-vannoj-komnaty-plitkoj.html.
- Tile laying begins with the second row, leaning on a metal rail. After the glue has hardened, this rail is removed as unnecessary. Between the rows and in the corners there are plastic crosses that help withstand the same thickness of the tile joints. Each tile is lightly pressed against the wall, removing protruding excess glue from the seams until they harden. Use the level to constantly check for even styling.
- In noticeable corners try to arrange whole tiles, then the cut rows will not be evident. For cutting tiles, purchase a special tool that allows you to quickly, accurately and evenly perform a cut. When using a grinder, a lot of dust is formed, so it is more convenient to use a glass cutter or tile cutter. Professionals use powerful machines that provide fast cutting of tiles in large volumes.
- After the tiling is completed, it is necessary to take a break for a day, during which the glue is completely dry.
- In a day start groutingwhy prepare the finished mixture in accordance with the instructions. Pour the dry mixture into a container of water, carefully move it, leave it for 10 minutes and place it well again. It is more convenient to fill the joints with a rubber spatula.
Important! The thickness of the seams is determined by the design project, while the values can vary depending on decorative purposes in the range from 0 to 20 mm. You can play with the color of the grout, choosing shades to match the cladding or contrasting the overall background. In any case, the seams should be neatly designed, otherwise the defects will catch the eye and spoil the interior of the bathroom.
- After half an hour, with a foam sponge, clean the tile from the solution. After an hour, repeat the procedure, finally cleaning the tile from stains with a flannel cloth.
Design Examples
It is impossible to imagine a tile laying design without the use of special decorative elements. Special moldings, like PVC corners, facilitate the process of finishing corners. A strip with an ornament (frieze) can be launched both horizontally and vertically. In this case, the space of the room is visually increased. Sometimes these strips are run parallel to each other in several rows. It all depends on the scope of your imagination. Single tiles with a pattern also allow you to create a stunningly beautiful interior.
Variations in the location of the decor are endless, so you can always design a bathroom in an original and unusual way. Feel free to combine tiles of a contrasting color, experiment with the structure of the material. Be a trendsetter in design, and why not? After all, there is always a place in life for new and bold ideas.
It’s easy to slip on bare tiles in the bathroom. To avoid troubles and make your stay in the room more comfortable, lay a small carpet. In the next article, you will learn how to choose a comfortable and beautiful rug:https://floor.expertexpro.com/en/dizain/kovriki-dlya-vannoj.html.
The final cost of laying the tiles depends on the price of the material and the skill of a professional tiler. After all, a specialist in demand does not experience a shortage of orders, therefore, he can dictate his terms on wages. However, saving on the master is by no means impossible, since the quality of repairing the bathroom should be a priority. Of course, if you want and have the simplest tile laying skills, you can do the cladding yourself. At the same time, you will save a certain amount of financial resources, but spend a lot of time. It is possible that the quality of the final result will not suit you. Therefore, weigh everything and make the only right decision.
Valentine 
Anastasia 
Karina
4 comments