What is good carpet tile and how to properly lay it
When it comes to carpeting, carpet carpet is most often implied - long-known roll material. But there is another variety of them - carpet tiles. This is the most progressive invention of mankind in the field of carpet weaving. With this kind of carpet you can combine options and achieve an interesting design.
What is the structure of such a tile?
Speaking quite primitively, this is a carpet cut into standard squares of 50x50 cm. But not everything is so simple. Unlike the latter, carpet tile has a rigid base. It is made of bitumen or polyvinyl chloride and reinforced with fiberglass. The base gives the coating elasticity and strength, protects it from slipping, provides a snug fit of individual modules during installation.
The top layer is a pile (split or loop).
Benefits of coating over other options
The materials used in the manufacture of carpet tiles are environmentally friendly and have all the necessary quality certificates. The coating has high heat-insulating and sound-absorbing characteristics. The multilayer base allows the use of tiles on underfloor heating.
The pile of products is treated with dirt-repellent antistatic impregnation, it is resistant to abrasion, it is easily restored after eliminating the load source. Microorganisms and insects will not be able to reproduce in it. As for the wear resistance of the tile, it directly depends on the quality of the fibers of which the pile is woven. Want to enjoy the flawless appearance of the coating as long as possible? Choose the one that is intended for public spaces.
In terms of aesthetics, carpet tiles are almost equal. Thanks to the possibility of designing, the modules can be decomposed as you wish. Don't want to be limited to strict geometries? Transform square elements into circles, stripes, etc. In addition, the material has a wide range of colors.
The modular coating is easy to operate - if worn areas occur, it is enough to change individual tiles. Waste during installation is a maximum of two percent, while for rolled material this figure can reach thirty percent.
Tile is an economical and rational choice.
How is styling done?
To lay the cover you will need such materials and tools:
- directly tile;
- scissors;
- stationery knife;
- roulette;
- ruler;
- beating.
Installation technology
- On a previously prepared clean and even base (concrete, vinyl, laminate, wood, etc.), markings are applied using beating.
- Carpet tiles unfold on the surface and “lay down” in this position for at least a day. This is necessary for leveling the material, its acclimatization in a particular room.
- Laying starts from the center of the room, remembering that the first row should be perfect in all respects. Otherwise, the end result may be affected. To fix the modules use special glue for carpet tiles.
- Coating elements are stacked close to each other, however excessive forces are best avoided.
- As the “process” advances, do not forget about the need to constantly monitor the parallelism and perpendicularity of the tile edges. An incorrectly installed coating fragment should be torn off and carefully glued again.
- Thus, the entire area of the room is filled. Walls may need to trim the edges of the tiles.
- In rooms with low traffic it is permissible to lay tiles in a free way (without fixing).
Note! Slice locations should be adjacent to the wall, not adjacent fragments!
Last but not least
Carpet tile is a good solution for the home, in particular, for the study, bedroom, and especially for the nursery. Having shown a little imagination, you can bring to life an outdoor fairy tale taking into account the wishes of the baby. And most importantly - this floor is cozy, comfortable and warm.
Coating should be purchased with a margin of approximately twenty percent. It will be useful to you for the implementation of design ideas and the subsequent restoration of "problem areas". And the last, within the framework of one room, material from only one batch should be used.
6 comments