What to make a floor in the basement - recommendations for choosing materials
In the basement of a residential building, we set up a home cinema, laid parquet on the floor. Due to problems with sewage on the street, our basement is often flooded with rising levels of sewage. The whole parquet was swollen. We want to change the coating to a more waterproof material. What advise to lay on the floor in a cinema in the basement of a private residential building?
Saul
Expert Answer
Hello Saule.
In the conditions described by you, you can use not so many materials. Let's try to consider each of them and give you recommendations on its use.
In our opinion, the best coverage in this case would be its complete absence. Yes, yes, you heard right, because it is impossible to spoil what is not, right? How is this possible? It is enough to equip a high-quality bulk floor in the basement, and all your problems will disappear by themselves. Today you can easily find a company that provides construction services 3D-floors. Of course, you will have to go for additional expenses, which, however, will pay off with the durability of the finish and the unsurpassed interior design. If such expenses are not provided for by your budget, then you can do it “simply and with taste” by arranging the floor using concrete with the addition of toppings and marble or granite chips. After grinding, the surface will acquire good decorative properties, and most importantly, the floor can be under water for an unlimited time.
In second place, you can put ceramic tiles or natural stone. Tiles in the form of parquet are presented in the trading network today, so if you like this option, we give an idea. We recommend that you do not save on materials and use high-quality tile glue, which will not be destroyed by moisture.
In our opinion, vinyl or rubber tiles earned the “bronze”. Glued to high-quality waterproof glue, it can withstand any flood without any problems. Today, the line of finishing material of this type contains many textures and colors, so you can easily choose a tile to your liking. That's just to make vinyl look “a million dollars”, it is necessary to conduct thorough preparation of the base and carry out installation in full accordance with the technology provided.
We will give the fourth place to linoleum. Of course, using a synthetic coating with fleecy insulation in your case will be a mistake. A thick roll material with a smooth back surface is easy! Just stick linoleum to the screed on the entire surface, carefully smoothing the material and removing air bubbles. As in the case of vinyl tiles, you will need a good waterproof adhesive and high-quality preparation of the rough surface.
We thought for a long time what material to put in fifth place. It would seem that went through all the moisture resistant options. But no - there is another alternative to intumescent flooring. Composite decking, or polymer decking! And what? Brutally and reliably! The installation of an artificial deck board is carried out using hidden brackets (kleimers), which increases its decorative value.
Saule, as you can see, there is plenty to choose from - any of these materials does not require special care and will be able to please you with its pristine appearance for decades. So the choice is yours!
