Top 15 best manufacturers of bulk floor mixes
The term "self-leveling floors" combines the mixtures of different composition used for the basic and finish leveling of any kind of base and the installation of various floor coverings.
Floor finishes must meet several requirements, including strength, durability and aesthetics. Bulk floor from the best manufacturer in the form of a seamless polymer or any other type of coating is characterized by very significant advantages compared to many other varieties of decorative and protective surfaces.
Content
Rating of the best manufacturers of bulk floors: top 15
The basis of bulk floors can serve as a variety of binders, which vary in composition, the presence of plasticizers and fillers.
Jam flooring is represented by several large groups: with a cement, polyurethane, epoxy and gypsum base.
The standard flow rate of each type of finished finishing mixture directly depends on several basic parameters, but most often varies from 0.8 to 2.0 kg per square meter of base with a millimeter layer applied. In addition, the mixtures differ in purpose, type of binder component, strength indicators and solidification time, as well as cost.
Finishing mixes
Compositions intended for the arrangement of decorative bulk floors, very successfully combine the highest performance and attractive appearance. Polymer compounds are in demand in the arrangement of bulk floors, but currently there are many varieties of polymers.
Decorative floor finishes have proven themselves in the premises of any purpose, and the average service life of such a coating is very long. Among other things, flooded floors do not need any special, too complicated or expensive maintenance.
Repair epoxy compound "Remosil"
The integrated two-component system ensures the unity of the monolithic coating, and also reduces the financial costs of arranging the floor finish even in poorly prepared or too uneven grounds.
Qualitative characteristics of the composition "Remosil".
Evaluation Criteria | Indicators |
Optimum operating temperature | 15-30 ° C |
Main component | epoxy resin |
Indicators of the height of the applied layer | up to 1 cm |
Strength indicators (MPa) | 60 |
Color | transparent |
Tinting option | there is |
The pot life of the mixture (min) | 45 |
Hardening time | day |
Millimeter layer flow rate | 0.8 kg / m2 |
Finish cost | about 600 p. / m2 |
Finishing area (one package) | 13.3 m2 |
"Liquid linoleum" or polyurethane "Polymerstone-2"
The two-component composition has excellent mechanical properties, is easily and easily tinted, and can also be used in any modern interior design.
Qualitative characteristics of the composition of Polymerstone-2.
Criteria for evaluation | Composition indicators |
Optimum operating temperature | 5 ° C and above |
Main component | polyurethane |
Indicators of the height of the applied layer | 0.2-0.3 cm |
Strength indicators (MPa) | 60 |
Color | Gray |
Tinting option | there is |
The pot life of the mixture (min) | 40 |
Hardening time | day |
Millimeter layer flow rate | 1,5 kg / m2 |
Finish cost | about 600 p. / m2 |
Finishing area (one package) | 13.3 m2 |
Dutch epoxy mix Arturo EP2500
Solvent-free modern epoxy flooring is used in medium to high-load areas with high wear resistance, and the addition of quartz sand makes the seamless finish non-slip.
Qualitative characteristics of the composition of Arturo EP2500.
Criteria for evaluation | Composition indicators |
Optimum operating temperature | 15–30 ° C |
Main component | epoxy resin |
Indicators of the height of the applied layer | 0.1-0.5 cm |
Strength indicators (MPa) | 90 |
Color | Gray |
Tinting option | there is |
The pot life of the mixture (min) | 20 |
Hardening time | day |
Millimeter layer flow rate | 1.6 kg / m2 |
Finish cost | about 1600 r / m2 |
Finishing area (one package) | 15.6 m2 |
Transparent bulk finish "Elacor-ED"
Epoxy two-component composition for creating a light-resistant bulk flooring, represented by an epoxy-colored base and hardener. It has no smell, and polymerization contributes to the formation of a strong and optically transparent film with a very high chemical and mechanical resistance.
Qualitative characteristics of Elacor-ED.
Criteria for evaluation | Composition indicators |
Optimum operating temperature | 5–25 ° C |
Main component | epoxy resin |
Indicators of the height of the applied layer | 0.15-0.5 mm |
Strength indicators (MPa) | 60–80 |
Color | transparent |
Tinting option | there is |
Ready mix viability | ½ hours |
Hardening time | 3 days |
Millimeter layer flow rate | 1.6 kg / m2 |
Finish cost | about 550 p. / m2 |
Finishing area (one package) | 21.8 m2 |
Bulk floor system EPD-121
Glossy two-component epoxy topcoat with pigmented bisphenols, functional additions and fillers. Due to the very high adhesion and excellent strength, it is possible to equip protective and decorative coatings in the premises of almost any purpose.
Qualitative Specifications EPD-121.
Criteria for evaluation | Composition indicators |
Optimum operating temperature | 15–30 ° C |
Main component | epoxy resin |
Indicators of the height of the applied layer | 0.1-0.5 cm |
Strength indicators (MPa) | within 60 |
Color | RAL tinted |
Tinting option | — |
The pot life of the mixture (min) | 40 |
Hardening time | 12–48 hours |
Millimeter layer flow rate | 1,5 kg / m2 |
Finish cost | about 800 r / m2 |
Finishing area (one package) | 15.3 m2 |
Finishing bulk coating Glims S-Level
Self-leveling compound for easy creation of a smooth, horizontal and matte surface. High-strength construction and finishing non-shrink mixture is ideal for application in manual mode or in a mechanized way, but curing speed should be considered.
Qualitative characteristics of Glims S-Level.
Criteria for evaluation | Composition indicators |
Optimum operating temperature | 15–30 ° C |
Main component | cement-sand base |
Indicators of the height of the applied layer | 0.1-0.5 cm |
Strength indicators (MPa) | up to 60 |
Color | Gray |
Tinting option | there is |
The pot life of the mixture (min) | 20 |
Hardening time | day |
Millimeter layer flow rate | 1,5 kg / m2 |
Finish cost | about 600 p. / m2 |
Finishing area (one package) | 15.3 m2 |
The most popular formulations for bulk floors
The highest quality and most popular brands of bulk floors have a large number of advantages, represented by the solidity and tightness of the resulting coating, high resistance to mechanical stress and stress, minimal coating thickness, as well as fire safety and excellent adhesion to concrete.
Quick-hardening universal "Eunice-Horizon"
It is used for work on almost any basis in manual and machine mode, if there are significant irregularities, as well as for applying a thin layer. Allows you to get a high-strength and smooth surface for decorative finishes, heating systems "warm floors" or for the arrangement of "floating floors".
Qualitative characteristics of the composition "Eunice-Horizon" universal.
Criteria for evaluation | Composition indicators |
Indicators of the height of the applied layer | from 2 to 100 mm |
Consumption at a height of 1 mm | 1.5–1.7 kg / m² |
Ready mix viability | half an hour |
Hardening time | 3 days / cm |
Strength indicators (MPa) | 15 |
Weight of packing | 20 kg |
average cost | 240 p. |
Dry mix “VOLMA – Level Express”
The basis of the mixture is a complex binder component, supplemented with fractionated quartz sand and modifiers, providing excellent mortar mobility and high-strength coating with an optimal duration of work.
Qualitative characteristics of VOLMA – Level Express.
Criteria for evaluation | Composition indicators |
Indicators of the height of the applied layer | from 5 to 100 mm |
Consumption at a height of 1 mm | 1.25 kg / m² |
Ready mix viability | hour |
Hardening time | 72 hours |
Strength indicators (MPa) | 15 |
Weight of packing | 20 kg |
average cost | 220 p. |
Quick-hardening basic leveler "Vetonit-5000"
It is widely used for high-quality leveling of concrete subfloors or cement-sand substrates, for the installation of screeds for a wide variety of floor coverings, including the heating system “warm floors”.
Qualitative characteristics of the Vetonit-5000.
Criteria for evaluation | Composition indicators |
Indicators of the height of the applied layer | from 2 to 100 mm |
Consumption at a height of 1 mm | 1,5 kg / m² |
Ready mix viability | half an hour |
Hardening time | day |
Strength indicators (MPa) | 15 |
Weight of packing | 25 kg |
average cost | 600 p. |
Bulk floor "Prospectors"
Quick-hardening composition for smoothing out significant irregularities on the substrates in dry and moderate humidity rooms. The option is ideally suited for arranging a system of primary or secondary heating “warm floors”.
Qualitative characteristics of the composition of "Prospectors".
Criteria for evaluation | Composition indicators |
Indicators of the height of the applied layer | from 5 to 100 mm |
Consumption at a height of 1 mm | 1.35–1.45 kg / m² |
The pot life of the mixture (min) | 40 |
Hardening time | 4 hours |
Strength indicators (MPa) | 15 |
Weight of packing | 25 kg |
average cost | 280 rub |
Universal self-leveling mixture Ceresit CN-175
Non-shrinking composition for use on weak substrates, characterized by resistance to cracking and suitable for arranging a “floating” screed or mechanized application. It features environmental safety and maximum ease of use.
Qualitative characteristics of the composition of Ceresit CN-175.
Criteria for evaluation | Composition indicators |
Indicators of the height of the applied layer | from 3 to 60 mm |
Consumption at a height of 1 mm | 1.6 kg / m² |
Ready mix viability | half an hour |
Hardening time | day |
Strength indicators (MPa) | 20 |
Weight of packing | 20 kg |
average cost | 380 p. |
Solution for finishing leveling BASIS NIPLAYN-T42
It is used for interior work, suitable for manual or mechanized application under the most popular and widespread decorative floor coverings, as well as underfloor heating systems.
Qualitative characteristics of the composition BASIS NIPLINE-T42.
Criteria for evaluation | Composition indicators |
Indicators of the height of the applied layer | from 3 to 30 mm |
Consumption at a height of 1 mm | 1.7 kg / m² |
The pot life of the mixture (min) | 40 |
Hardening time | 6–72 hours |
Strength indicators (MPa) | 15 |
Weight of packing | 25 kg |
average cost | 390 p. |
Self-leveling mixture "Roussean-Level"
Bulk thin-layer floor of quick-hardening type with excellent operational and working properties.
Qualitative characteristics of the composition of Roussean-Level.
Criteria for evaluation | Composition indicators |
Indicators of the height of the applied layer | from 2 to 80 mm |
Consumption at a height of 1 mm | 1.3 kg / m² |
Ready mix viability | half an hour |
Hardening time | 4-12 hours |
Strength indicators (MPa) | 15 |
Weight of packing | 20 kg |
average cost | 275 p. |
Basic bulk floor FORMAN
Designed for starting alignment of the bearing base for the subsequent topcoat. The composition on a gypsum knitting basis is used both in public and residential premises for various purposes, regardless of the level of humidity.
Qualitative characteristics of the composition of FORMAN.
Criteria for evaluation | Composition indicators |
Indicators of the height of the applied layer | from 20 to 100 mm |
Consumption at a height of 1 mm | 3.2–3.6 kg / m² |
Ready mix viability | half an hour |
Hardening time | 4-24 hours |
Strength indicators (MPa) | 25 |
Weight of packing | 25 kg |
average cost | 230 p. |
Universal composition "Litopol" De Luxe
The mixture is based on a mineral binder with modifying additives. It is widely used in preliminary and finishing leveling, under the heating system "underfloor heating" or the arrangement of "floating floor".
Qualitative characteristics of the composition of "Litopol" De Luxe.
Criteria for evaluation | Composition indicators |
Indicators of the height of the applied layer | from 5 to 100 mm |
Consumption at a height of 1 mm | 1.3–1.5 kg / m² |
Solution viability | half an hour |
Hardening time | 6–72 hours |
Strength indicators (MPa) | 10 |
Weight of packing | 25 kg |
average cost | 330 p. |
Modern self-leveling floors have a very wide range of operation, therefore, they are actively used in arranging rough finishes and fine decorative flooring in residential, office, public buildings, as well as in sports, cultural and leisure and even some industrial facilities. When choosing a composition, special attention should be paid to the main parameters, which will allow you to purchase the best option for obtaining a durable and reliable coating, depending on the purpose of the room.